PTA(OTW) Balloon Catheter
The GENOSS PTA Balloon Catheter is an Over the Wire (OTW) peripheral balloon catheter, specifically designed for Percutaneous Transluminal Angioplasty in stenotic vessel segments.
The balloon is designed to inflate to a controlled diameter and length when inflated. The Balloon Catheter has two platinum iridium radiopaque marker bands. Two radiopaque marker bands are located at both ends of the balloon, to facilitate fluoroscopic visualization and define the length and location of the balloon. The balloon catheter includes a tapered soft-tip to facilitate the advancement in the lesion. The usable length of the GENOSS PTA Balloon Catheter is 50cm, 80cm and 130cm.
The catheter has a dual lumen shaft. The dual lumen shaft is branched at the proximal end so that one lumen forms the entrance to the central lumen for the guidewire, of diameters 0.035"(0.89mm) or smaller to facilitate advancement of the balloon catheter through the stenosis segment to be dilated, while the other lumen is used to inflate and deflate the dilatation balloon with a mixture of contrast medium and saline solution. The balloon catheter is provided with hydrophilic coating that is activated when wet.
The GENOSSTM PTA Balloon Catheter is intended to dilate stenosis in the iliac, femoral, ilio-femoral, popliteal, infra-popliteal and renal arteries, and for the treatment of obstructive lesions of native or synthetic arteriovenous dialysis fistulae.
- 12ATM: Ø4, Ø5, Ø6, Ø7, Ø8
- 11ATM: Ø9
- 10ATM: Ø10, Ø12
Rated Burst Pressure
- 23ATM: Ø4(60mm or less), Ø5(80mm Below), Ø6(80mm Below), Ø7(80mm Below)
- 20ATM: Ø4(80mm or more), Ø5(100mm More than), Ø6(100mm More than), Ø7(100mm More than)
- 18ATM: Ø8
- 16ATM: Ø9
- 17ATM: Ø10, Ø12